About Sealant Flexibility
More
About Structural Adhesives
More
About Paint and Protective Coatings
More
Thread Sealants for Oxygen Systems
Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
Container | Max. Pressure, psi | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Temp. Range, °F | Max. Temp. for Oxygen, °F | For Max. Thread Dia. | Consistency | Color | Each | |
Low Locking Strength | ||||||||||
3.5 | Jar | 10,000 | 10,000 | -450° to 550° | 140° | 6" | Paste | Green | 000000 | 0000000 |
Optically Clear Reusable Adhesive Gel
Temporarily stabilize objects on flat surfaces with this clear adhesive gel. It removes cleanly from most surfaces with a twist, and it won't dry out so it can be used again.
Container | |||||||
---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Reaches Full Strength | Temp. Range, °F | Color | For Joining | Each | |
4 | Jar | 60 min. | -20° to 220° | Clear | Ceramic, Composites, Glass, Masonry, Metal, Rubber | 0000000 | 000000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
0.9 | Thick Liquid | 25 min. | 24 | 450 | 1.87 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 000000 |
1 | Gel | 4 hrs. | 6 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 00000 |
1.5 | Thin Liquid | 30 min. | 26 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 00000 |
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Mix Ratio | Tensile Strength, psi | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
16 | Thin Liquid | 30 min. | 26 | 6:1 | 9,500 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 0000000 |
19 | Thick Liquid | 25 min. | 24 | 12:1 | 10,900 | 450 | 1.87 | 500° | __ | Steel, Ceramic, Glass | Black | 0000000 | 000000 |
20 | Gel | 4 hrs. | 6 | 4:1 | 11,000 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Steel, Ceramic, Glass | Black | 0000000 | 000000 |
Adjustable-Flexibility Heat-Transfer Potting Compounds
Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
Jar Compounds | ||||||||||||
12 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 0000000 |
24 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
Jar and Syringe Compounds | ||||||||||||
1.6 | Thick Liquid | 30 | 26 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1.01 | -100° to 450° | 2 hrs. @ 250° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 00000 |
Extreme-Temperature Gasket Maker Sealants
Use these gasket makers to form a tight seal on furnace doors, exhaust systems, stoves, and other high-temperature applications. They are fire resistant and resist most acids, solvents, and corrosives. They are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and they make it easy to form irregular-shaped gaskets.
Container | Temp. Range, °F | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Min. Temp. | Max. Temp. | Color | For Use On | Each | |
1 | Jar | 0.125" | 20 | 72 | Not Rated | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
3 1/2 | Jar | 0.25" | 20 | 72 | -300° | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
7 | Jar | 0.25" | 20 | 72 | -300° | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
Surface Fillers for Metal
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.
Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Aluminum Liquid | ||||||||||||||
PC 3466 | 1 lbs. | Jar, Can | 20 | 24 | Thick Liquid | 5:1 | 60 sq. in. @ 1/4" | -20° to 200° | Gray | __ | Machine, Drill, Tap | Aluminum | 0000000 | 0000000 |
Loctite® Fixmaster Aluminum Putty | ||||||||||||||
PC 7254 | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 70 sq. in. @ 1/4" | -20° to 200° | Gray | __ | Machine, Drill, Tap | Aluminum | 0000000 | 000000 |
Loctite® Fixmaster Steel Putty | ||||||||||||||
EA 3471 | 1 lbs. | Jar | 30 | 24 | Thick Liquid | 2.5:1 | 40 sq. in. @ 1/4" | -20° to 220° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
EA 3473 | 1 lbs. | Jar | 3 | 24 | Paste | 1:1 | 50 sq. in. @ 1/4" | -20° to 190° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
Loctite® Fixmaster Stainless Steel Putty | ||||||||||||||
EA 3476 | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 30 sq. in. @ 1/4" | -20° to 220° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Devcon Plastic Steel® Liquid | ||||||||||||||
10210 | 1 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
10220 | 4 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 200 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® Putty | ||||||||||||||
10110 | 1 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 40 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
10120 | 4 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 190 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® 5 Minute Putty | ||||||||||||||
10240 | 1 lbs. | Jar, Can | 5 | 16 | Putty | 1.7:1 | 40 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Bronze Putty | ||||||||||||||
10260 | 1 lbs. | Jar, Can | 35 | 16 | Putty | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Bronze | __ | Machine, Drill, Sand, Saw, Tap | Brass, Bronze | 00000000 | 000000 |
Devcon Stainless Steel Putty | ||||||||||||||
10270 | 1 lbs. | Jar, Can | 60 | 16 | Putty | 11:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 00000000 | 000000 |
Devcon FasMetal™ Putty | ||||||||||||||
10780 | 0.75 lbs. | Jar, Can | 4 | 16 | Putty | 1:1 | 60 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||
PC 7222 | 1 | Jar | 30 | 24 | Putty | 2:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Large-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | ||||||||||||||
PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | 2:1 | 260 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
PC 7357 | 6 | Jar, Can | 25 | 8 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
PC 9599 | 6 | Jar, Can | 10 | 3 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | -20° to 220° | Blue | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
Chemical-Resistant Surface Fillers for Metal
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Superior Metal | |||||||||||||||
EA 3478 | 1 | Jar | 20 | 24 hrs. | Paste | 4:1 | 30 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Machine, Drill | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Devcon Titanium Putty | |||||||||||||||
10760 | 1 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 40 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 000000 |
10770 | 2 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 90 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Mix Ratio | Min. | Max. | For Use On | Each | |
Surface Fillers | |||||||||||
0.5 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 0000000 |
1 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Aluminum Liquid | |||||||||||||
10710 | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 0000000 |
10720 | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||
10610 | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
10620 | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||||
2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 000000 |
2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
12 | Jar | 30 | 24 hrs. | Paste | 1:1 | 85 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 0000000 | 00000 |
14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
Deep-Crack Concrete Fillers
Fill cracks up to 10" deep on vertical and overhead surfaces. To use this filler, secure the included injection ports to the crack with the two-part epoxy sealer, then spread sealer over the entire crack. Allow sealer 24 hours to cure. Application time for sealer, after mixing, is 40 minutes. To fill the rest of the void, use the cartridge with a standard caulk gun (sold separately) to dispense the two-part epoxy filler into the injection ports.
Sealant | Filler | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Container Type | Container Size, fl. oz. | Container Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Color | For Max. Crack Wd. | Approx. Coverage @ Thick. | Application Temp. Range, °F | Finishing Method | For Use On | Each | |
34 | Jar | 10 | Cartridge | 15 | 24 | Thin Liquid | 1:1 | Light Amber | 1/4" | 8 ft. @ 10" | 50° to 90° | Sand, Tap | Concrete | 00000000 | 0000000 |
Drywall Crack Fillers
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size, pt. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/8" | 1 | Jar | Paste | 5 | 2 | 20 ft. @ 8 mil | 8 mil | 50° to 120° | White | Sand | Yes | Drywall, Plaster, Concrete, Wood | 000000 | 000000 |
Spackling Compounds
Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size | Type | Consistency | Approximate Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/4" | 8 fl. oz. | Jar | Paste | Not Rated | 0° to 150° | White | Sand | No | Drywall, Plaster, Wood | 0000000 | 00000 |
1/4" | 1 qt. | Jar | Paste | Not Rated | 0° to 150° | White | Sand | No | Drywall, Plaster, Wood | 0000000 | 0000 |
Wood Surface Fillers
Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Consistency | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Mixing Required | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
12 fl. oz. | Jar | Putty | 1 | 8 | Yes | 1:1 | 85 sq. in. @ 1/4" | 3/4" | 0° to 200° | Tan | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 000000 |
2 pt. | Jar | Putty | 1 | 8 | Yes | 1:1 | 230 sq. in. @ 1/4" | 3/4" | 0° to 200° | White | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 00000 |