We will reply to your message within an hour.
More
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Designed for smaller-than-standard-diameter through holes, these latches are often used for securing doors and drawers.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/2" dia. through holes.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Fold the ring handle into the recess to stay out of the way when not in use.
With a flat inset grip, the handle is recessed to stay out of the way.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Raise the handle and it swings smoothly for easy latching and unlatching.
Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.